| System |
Active, sealed box |
| Frequency |
29 Hz – 250 Hz (+/- 3 dB) |
| Amplifier Power |
140 watts, 4 Ohm |
| Sub I/O, LFE/slave in |
RCA |
| Sat/Sub input |
Right/Left unfiltered, RCA |
Sub I/O, LFE/to Slave |
RCA |
| Sat output |
Right/Left, high pass filtered, RCA |
| Operation mode |
LFE, slave (controls for phase and gain are disabled in slave-mode) |
| Phase configuration |
0°, 180° |
| Sat high pass |
Flat, 60 Hz, 80 Hz |
| Sub low pass |
50 Hz – 150 Hz |
| Auto turn on (LED = green) |
Immediately once signal is detected |
| Auto turn off (LED = red) |
After 15 – 20 minutes without detectable signal |
| Power consumption |
14 watts / 325 watts max. |
| Cone |
240 mm (10 inch), one piece MSP (magnesium silicate polymer) diaphragm |
| Coil |
100 mm (4.2 inch), pure aluminium voice coil |
| Weight |
10 kg |
| Dimensions(W x H x D) |
289 x 294 x 318 mm |
|
|
;)
